Balboa Heater - M7 - 3.0kW (Plug N' Click)
Works with BP Spa Packs
Plug N' Click Balboa Heater Assembly - M7 - 3.0kW
Fitted with 24" M7 sensor technology to regulate spa water flow and temperature (Click HERE for Details)
Heater gaskets and split nut unions are also included making for easy installation and removal. Solvent weld sockets for 2" pipe. Fixed into place with 2 x mounting studs top and bottom.
The heater comes complete with two M7 sensors, pre mounted at each end of the heater tube ready for connection to the control box. These sensors monitor each other using the onboard software to regulate the spas functions of water flow and temperature. This technology allows for a correct operating environment for the heater. The sensors automatically adapt to the flow direction and detect restrictions including dirty filters.
This Balboa heater assembly is quick to install and allows for easy servicing and troubleshooting, due to the split 2 inch buttress thread unions with O ring. The union is ready to accept glued 2 inch pipework.
3KW Version
Always match the heater number to ensure the correct specification, the 3kw can be used with GS500, 500Z, 501, 501Z (3.0KW only), 501SZ, 510, 510S, 510Z, 510SZ, 511SZ, 523DZ, GL2000 mach 3, GL2001 mach 3 systems, it is used in spa including Spaform, Hydrospa, Canadian, Aegean, Catalina, Hydropool, , Marquis Spa, , Leisurite, Leisure Bay, Signature Spas, Hot Tubs Direct.
PLEASE NOTE - This heater assembly is not compatible with BP200 Spa Pack
| Plumbing Connection | 2.0'' |
| Length (includes tails) | 495 mm |
| Mount Type | Cilp |
| Sensor Type(s) | M7 - Probe |
| Integrated in Spa Pack | Yes |
| Element | Incoloy |
| MPN | 58300 |
| Type | Flow Thru |
| Amps | 11.5-12.0 |
| Voltage / Hz | 230V - 50/60Hz |
| Power | 3.0 kW |
| Terminal Spacing | 31.75 mm |
| Element Length | 10" (255mm) |
| Element Type | Incoloy |
| Compatible Spa Pack | Balboa BP |
Important
Information:
Our range of Spa Packs must be installed by a competent individual
or tradesman, that is trained within the industry. Spa Packs and other
computerised equipment are exempt from our returns policy if they have been
opened or installed. If the spa pack is suspected as being
faulty, it will need to be returned to us within the warranty period and will
then be forwarded to the manufacturer for inspection. If deemed to be faulty,
we will replace under warranty. If the board is not at fault or is found to
have been damaged due to installation, an additional charge will be required to
cover the costs of shipping and return.
*Please ensure this is the correct Spa Pack as this item is non-refundable - If
you are unsure, please contact our friendly customer service team for advise
& support
